Hårdmetall fres 2 tenner 5-16mm
€14,61 – €110,11 Ekskl. mva
Velg ønsket modell:
Beskrivelse
JK Nástroje • Hårdmetallfres 2 tenner 5-16mm
Høyytelsesfreser laget av finkornet universalkarbid med høykvalitets TiAlN -basert belegg. For materialhardhet opp til 55 HRc.
Tilgjengelige størrelser:
Art.nr SB 0502 SB 0602 SB 0802 SB 1002 SB 1202 SB 1602 Verktøydiameter (d) 5 mm 6 mm 8 mm 10 mm 12 mm 16 mm Klippelengde (l) 10 mm 12 mm 16 mm 20 mm 24 mm 32 mm hjørneradius (R) 2.5 3 4 5 6 8 Skaftdiameter (D) 6 mm 6 mm 8 mm 10 mm 12 mm 16 mm Total lengde (L) 50 mm 50 mm 60 mm 75 mm 75 mm 100 mm Antall tenner (Z) 2 2 2 2 2 2
Gjelder for komplekse former:
Freser egnet for produksjon av komplekse former, for støpeformere og for romfartsindustrien. Den banebrytende geometrien tillater også maskinering av legert stål herdet opp til 55 HRc, nikkelstål og titanlegeringer.
Belegg:
TiAlN -basert belegg av høy kvalitet, mikrohardhet (HV 0,05) = 3300, maksimal arbeidstemperatur 900°C, lav friksjonskoeffisient (tørr mot stål 0,25)
Høy holdbarhet sammenlignet med konvensjonelt TiAlN belegg.
Egnet for høy varmebelastning (tørr bearbeiding, HSC)
Lilla TiAlN belegg er et av de mest brukte beleggene i moderne høyytelsesbearbeiding. TiAlN belegg er motstandsdyktige mot oksidasjon og gjør at arbeidet kan utføres ca. 20 – 35 % raskere enn med TiN belegg. Aluminiuminnholdet i disse beleggene er omtrent 50 prosent. TiAlN belegg er anvendelig for maskinering av slipende materialer som støpejern og er egnet for tørr bearbeiding på grunn av sin høye varmebestandighet.
JK Nástroje – Høykvalitets skjæreverktøy laget i Europa.
Standarder
Spesifikasjon
| Merke | JK Nástroje |
|---|---|
| Belegg | TOPP TiAIN |
| Helixvinkel | 35° |
| Materialets hardhet | Opptil 55 HRc |
| Verktøydiameter / skjærelengde | Ø 5 / 10 mm, Ø 6 / 12 mm, Ø 8 / 16 mm, Ø 10 / 20 mm, Ø 12 / 24 mm, Ø 16 / 32 mm |
Forbrukersalg
garanti
Standarder
Bare innloggede kunder som har kjøpt dette produktet kan legge igjen en omtale.
Shipping Policy
1.1 For orders where the Seller is arranging transport and are delivering the goods at the buyers requested delivery address, the delivery terms are: DAP – Delivery At Place (Buyers delivery address) Incoterms® 2020. The Seller delivers the goods to a named place of destination, but is not responsible for unloading. His responsibilities include packing, export clearance, carriage expenses and any terminal costs up to the agreed destination. The Buyer is responsible for all costs, duties and taxes associated with unloading the goods. He is also responsible for clearing customs to import the products into the named country of destination.
1.2 For orders where the Buyer is picking up or arranging transport of the goods from Sellers address the delivery terms are: EXW - Ex Works (Sellers address) Incoterms® 2020. The Seller is responsible for making the goods available at its premises. The Buyer handles all costs and risk after the products are collected.
Cancellation / Return / Refund Policy
2.1 Orders can be cancelled until they have been shipped. However maximum 24 hours after the order has been placed.
2.2 Standard products kept in store by the Seller can be returned until 7 days after delivery. The returned products must be unused and in original packaging to be refunded. The shipping costs are non-refundable. Products produced to order cannot be returned and refunded.
2.3 Se how to initiate a return here.
Warranty Policy
3.1 The Seller warrants to the Buyer that all products delivered by the Seller are free of defects in relation to materials, design and finish (the \"Warranty\"). The Warranty applies for the warranty period for the specific product, and any claim from the Buyer under the Warranty must have been made in writing to the Seller within the warranty period. The warranty period for the product is specified on the MEMIDOS product page. The warranty period is counted from delivery of the product.
3.2 Complaints must be made in writing and be received by the seller no later than 6 working days after the
error/defect could have been discovered using general diligence. In all events, a complaint must have taken place before expiry of the warranty period.
3.3 In case of timely complaints, see 3.2, The Seller is obliged, at the Seller’s own choice, to redeliver or repair products not in compliance with the Warranty. This is the Buyer’s sole remedy in the case that supplied product are not in compliance with the Warranty or otherwise defective. The Seller is not obliged to pay the installation costs in the events where installation can usually be made by the Buyer.
3.4 The warranty only applies if the product has been handled, stored and used with the proper care, for the intended purpose and in compliance with applicable law, user instructions and other instructions from the Seller, and that the products supplied, have not been changed or otherwise modified in any way. No warranty is granted for wearing parts, and usual wear and tear are not covered by the warranty.
3.5 No warranty is granted to products that can be categorised as wearing parts or consumables.
Relaterte produkter
-
Avgrading avfas 60° 4-12mm
- €17,80 – €45,95 Ekskl. mva
-
Avgrading avfas 90° 4-12mm
- €17,80 – €45,95 Ekskl. mva
-
Hårdmetallfres 4 tenner 1-5mm • Lang versjon
- €12,51 – €18,28 Ekskl. mva
Omtaler
Det er ingen omtaler ennå.