Güvenilir endüstriyel gaz izleme ve güvenlik uyumu için NDIR teknolojisine sahip MaiYa MST-F100 yanıcı gaz sensörü.

MaiYa • MST-F100 • Yanıcı gaz algılama sensörü (NDIR)

€200,00 Hariç KDV

MEMIDOS Ödeme Koruma
Satıcı:  Ningxia MaiYa Sensor Technology Development
Çin
Teslimat şartları: DDU
Ürün kargoya verilecektir 1-2 hafta
  Bir soru sor
Stok kodu: MST-F100-Ex-ndir Kategoriler:

tüketici satışı



garanti

12

Bu ürünü arkadaşlarınızla paylaşın:

Açıklama

MaiYa • MST-F100 • Yanıcı gaz algılama sensörü (NDIR)

MaiYa MST-F100, gelişmiş dağıtıcı olmayan kızılötesi (NDIR) teknolojisini kullanan profesyonel düzeyde yanıcı gaz sensörüdür. Endüstriyel uygulamalar için tasarlanmış olan sensör, petrol, kimya ve metalurji gibi sektörlerde tehlikeli gazların izlenmesinde yüksek güvenilirlik ve istikrar sağlar. Bu akıllı gaz algılama vericisi, dijital ve analog karışık iletişim teknolojisine sahiptir, böylece kurulum ve bakım kolaylaşır. Şeffaf bir LCD ekran ve özelleştirilebilir alarm eşikleriyle donatılmış MST-F100, bağımsız ses ve ışık alarmı çıkışları sunar. PLC ve DCS dahil olmak üzere çeşitli kontrol sistemleriyle uyumludur ve uzaktan algılama ve alarm işlevlerini sağlar. Ürün, GB12358-2006 ve diğer ilgili güvenlik standartlarına uygun olarak işyeri güvenliği izlemede en iyi performansı garanti etmektedir.

Temel özellikler ve faydalar

  • 12-30 V DC güç kaynağı
  • 1 röle çıkışı
  • 3 telli 4-20mA sinyal çıkışı; RS485 veya 2 telli 4-20mA isteğe bağlı
  • Bağımsız ses ve ışık alarmı çıkışı
  • Büyük karakter ekranlı şeffaf LCD ekran
  • Kolay ayarlar için fonksiyon düğmeleri
  • Uzun mesafe çalışması için isteğe bağlı kızılötesi uzaktan kumanda
  • Özelleştirilebilir alarm eşikleri

Dahil edilen aksesuarlar

  • Kurulum kılavuzu
  • Kalibrasyon sertifikası

Teknik özellikler ve yapılandırma

Güç kaynağı voltajı DC 12V ~ 30V, 500mA, güç dalgası 20mV’den daha az
Çıkış hatası <1% (4 ~ 20mA parça)
Röle kapasitesi DC30V 1A
Çevresel menzil (-40 ~ 70) °C (yanıcı) (-20 ~ 55) °C (özel ayarlara göre ayarlanmıştır)
İş ihtiyaçları. Bu değere ulaşmak için sıcaklık telafisi gereklidir.) (10 ~ 95) kondensasyon olmadan %RH
Atmosfer basıncı 90 ~ 110Kpa
Boyut 193mm × 139mm × 92mm (L × B × H)
Kabuklu malzeme Döküm alüminyum, patlamaya dayanıklı ve korozyona karşı
Ağırlık 1,5 Kg (enstrümanın net ağırlığı)
Patlamaya dayanıklı işaret Ex d IIC T6 G

Sensör Parametresi

Gaz İlke Menzil Düşük nokta alarmı Yüksek nokta alarmı Çözünürlük
Yanıcı gaz NDIR 0-100%LEL 5 20 1/0.1PPM

standartlar



Şartname

Nakliye ağırlığı (kg) 2,5 kg
Nakliye boyutları (mm) 250 × 250 × 150 mm
Marka

Country of Origin

CN
Tariff number (HS code)

902710090
Kabuk Malzemesi

Döküm alüminyum, patlamaya dayanıklı ve korozyon önleyici

tüketici satışı



garanti

12

standartlar



Değerlendirmeler

Henüz değerlendirme yapılmadı.

Sadece bu ürünü satın almış olan müşteriler yorum yapabilir.

Bu ürün için başka teklif yok!

Shipping Policy

1.1 The seller is arranging the transport, and the delivery terms can be either DDU or DDP. The specific delivery terms used for each product is determined by the seller and can be seen on its product page under “Delivery terms”.

- DDU (Delivered Duty Unpaid): The seller arranges transport and delivers the goods to the buyer’s specified address. The seller covers packing, export clearance, transportation, and delivery and any terminal costs up to the agreed destination. However, the buyer is responsible for import duties, taxes, and customs clearance.

- DDP (Delivered Duty Paid): The seller delivers the goods to the buyer’s address and is responsible for all processes until the goods are in the buyer’s possession. The seller handles all shipping costs, including import duties, taxes, and customs clearance. The buyer is responsible for receiving the goods and unloading them.

1.2 For orders where the buyer is picking up or arranging transport of the goods from seller’s address the delivery terms are: FCA (Free Carrier at seller’s address). The seller is responsible for making the goods ready for export, to the buyer’s chosen carrier at the seller’s premises. The buyer handles all costs and risks after the products are collected.

Cancellation / Return / Refund Policy

2.1 Orders can be cancelled until they have been shipped. However maximum 24 hours after the order has been placed.

2.2 Standard products kept in store by the seller can be returned until 7 days after delivery. The returned products must be unused and in original packaging to be refunded. The shipping costs are non-refundable. Products produced to order cannot be returned and refunded.

2.3 See how to initiate a return here.

2.4 If delivery cannot be completed due to circumstances attributable to the buyer, including but not limited to refusal of delivery, failure to receive the goods, failure to collect the goods from a carrier, incorrect delivery information provided by the buyer, or failure to pay applicable import duties, taxes, or customs charges under DDU delivery terms, the order shall not be considered cancelled or returned in accordance with this policy.

In such cases, the seller may deduct from any refund all reasonable costs incurred as result of the failed or refused delivery, including freight charges, return freight, storage charges, customs charges, duties, taxes, handling fees, and any other costs incurred by the seller or its logistics providers.

For products that are manufactured to order, customized, specially sourced, or otherwise non-returnable under section 2.2, no refund shall be due if delivery is refused.

If the goods cannot be returned to the seller, are abandoned, destroyed, or otherwise become unavailable due to the buyer’s refusal or failure to accept delivery, the buyer remains liable for the full purchase price.

Warranty Policy

3.1 The seller warrants to the buyer that all products delivered by the seller are free of defects in relation to materials, design and finish ( the Warranty ). The Warranty applies for the warranty period for the specific product, and any claim from the buyer under the Warranty must have been made in writing to the seller within the warranty period. The warranty period for the product is specified on the MEMIDOS product page. The warranty period is counted from delivery of the product.

3.2 Complaints must be made in writing and be received by the seller no later than 6 working days after the error/defect could have been discovered using general diligence. In all events, a complaint must have taken place before expiry of the warranty period.

3.3 In case of timely complaints, see 3.2, The seller is obliged, at the seller’s own choice, to redeliver or repair products not in compliance with the Warranty. This is the buyer’s sole remedy in the case that supplied product are not in compliance with the Warranty or otherwise defective. The seller is not obliged to pay the installation costs in the events where installation can usually be made by the buyer.

3.4 The warranty only applies if the product has been handled, stored and used with the proper care, for the intended purpose and in compliance with applicable law, user instructions and other instructions from the seller, and that the products supplied, have not been changed or otherwise modified in any way. No warranty is granted for wearing parts, and usual wear and tear are not covered by the warranty.

3.5 No warranty is granted to products that can be categorised as wearing parts or consumables.

İlgili ürünler