Chisels, Wedges and Crowbars - Non-sparking

Showing 49–64 of 69 resultsSorted by popularity

AMPCO Safety Tools • Flat end pneumatic chisel • (AlBz)
Price range: €344.56 through €374.24 Excl. VAT Select options This product has multiple variants. The options may be chosen on the product page
AMPCO Safety Tools • Pointed end pneumatic chisel • (BeCu)
Price range: €458.16 through €897.28 Excl. VAT Select options This product has multiple variants. The options may be chosen on the product page
AMPCO Safety Tools • Pointed end pneumatic chisel • (AlBz)
Price range: €307.60 through €359.76 Excl. VAT Select options This product has multiple variants. The options may be chosen on the product page
AMPCO Safety Tools • Pointed end pneumatic chisel • DIN20376 (BeCu)
Price range: €498.40 through €617.04 Excl. VAT Select options This product has multiple variants. The options may be chosen on the product page
AMPCO Safety Tools • Pointed end pneumatic chisel • DIN20376 (AlBz)
Price range: €261.52 through €323.76 Excl. VAT Select options This product has multiple variants. The options may be chosen on the product page
AMPCO Safety Tools • Diamond point chisel • (BeCu)
Price range: €91.92 through €192.88 Excl. VAT Select options This product has multiple variants. The options may be chosen on the product page
AMPCO Safety Tools • Diamond point chisel • (AlBz)
Price range: €48.24 through €101.60 Excl. VAT Select options This product has multiple variants. The options may be chosen on the product page
AMPCO Safety Tools • Groove chisel • (BeCu)
Price range: €136.00 through €167.20 Excl. VAT Select options This product has multiple variants. The options may be chosen on the product page
AMPCO Safety Tools • Groove chisel • (AlBz)
Price range: €71.44 through €87.84 Excl. VAT Select options This product has multiple variants. The options may be chosen on the product page
AMPCO Safety Tools • Cape chisel, Cross chisel • (BeCu)
Price range: €80.16 through €348.24 Excl. VAT Select options This product has multiple variants. The options may be chosen on the product page
AMPCO Safety Tools • Cape chisel, Cross chisel • (AlBz)
Price range: €42.16 through €182.64 Excl. VAT Select options This product has multiple variants. The options may be chosen on the product page
AMPCO Safety Tools • Hand chisel, flat chisel (Oval) • (BeCu)
Price range: €69.28 through €166.16 Excl. VAT Select options This product has multiple variants. The options may be chosen on the product page
AMPCO Safety Tools • Hand chisel, flat chisel (Oval) • (AlBz)
Price range: €34.08 through €81.84 Excl. VAT Select options This product has multiple variants. The options may be chosen on the product page
AMPCO Safety Tools • Hand chisel, flat chisel • (BeCu)
Price range: €42.24 through €389.84 Excl. VAT Select options This product has multiple variants. The options may be chosen on the product page
AMPCO Safety Tools • Hand chisel, flat chisel • (AlBz)
Price range: €22.72 through €210.56 Excl. VAT Select options This product has multiple variants. The options may be chosen on the product page
WEDO • Crowbar, wrecking bar • Aluminum Bronze
Price range: €129.12 through €393.84 Excl. VAT Select options This product has multiple variants. The options may be chosen on the product page

What is chisels, wedges and crowbars – non-sparking?

This category includes non-sparking and non-magnetic chisels, wedges and crowbars made from alloys such as aluminium bronze and beryllium copper. These tools are engineered to avoid ignition risks in explosive or flammable atmospheres while remaining durable and safe. Industrial professionals, safety engineers, procurement managers and field technicians often seek these tools for hazardous area compliance and high-risk site applications.

Products you’ll find in this category

Within this category, industrial buyers will find a range of chisels, wedges and crowbars in non-sparking materials. Examples include pointed-end and flat-end pneumatic chisels, groove chisels, caulking tools (straight and offset), flange wedges, crate openers, pry bars or pinch bars, earthing spikes and wrecking or crowbar bars. Variants are available in both beryllium copper and aluminium bronze. These tools are offered in several sizes, cross-sections, lengths, and tip types.

Applications & industry use cases

These non-sparking chisels, wedges and crowbars are used in sectors where fire or explosion hazard is a concern, such as oil & gas, chemical processing, petrochemical plants, mining, or shipbuilding. They enable safe prying, chiselling, spreading, or removing materials without creating sparks. Examples include hazardous area tools, ATEX zone compliance, and explosion proof hand tools. Professionals working in maintenance, shutdowns, or equipment overhaul operations rely on this tool range for safety and regulatory adherence.

Technical guide to chisels, wedges and crowbars – non-sparking

Non-sparking chisels, wedges and crowbars are tools designed to perform mechanical tasks—such as cutting, prying, beating or spreading—without producing sparks that might ignite flammable gases, vapors or dust. Key technical characteristics include material composition (primarily aluminium bronze or beryllium copper), magnetic permeability close to unity for non-magnetic behaviour, and sufficient hardness to resist deformation under impact. Sizes are specified in dimensions such as tip width, blade thickness, length and cross-section. Variations include straight tips, offset tips, groove or cape chisels, pneumatic-powered chisels for high-impact work, wedge tools for separation or spreading, and bars for leverage or demolition work.

Standards and certifications are relevant: materials may be tested under EN 80079-38 for low-sparking behavior, and compliance with ATEX directive 1999/92 is often required in many jurisdictions. Selection considerations include the ambient and operational environment (temperature, presence of corrosive substances), required impact energy, the type of force (pneumatic vs manual), component compatibility (e.g. matching wedge size or chisel shank to tool holders), and maintaining tolerances for tip geometry. Durability in use, resistance to wear, and performance under repeated hammering or vibration are also critical factors.

Why buy chisels, wedges and crowbars – non-sparking at MEMIDOS

MEMIDOS operates as a global B2B platform connecting industrial purchasers with manufacturers and verified suppliers directly, minimizing intermediary costs. Buyers benefit from secure, escrow-based payment handling where funds are held until supplier meets conditions such as shipment, ensuring protection and reliability. The platform offers access to high-quality industrial products from non-sparking tool specialists, simplifying international procurement. Transparency in sourcing and efficient supplier connections support operational planning, risk management, and compliance with safety regulations.

Frequently asked questions about chisels, wedges and crowbars – non-sparking

What materials are used for non-sparking chisels, wedges and crowbars?

The tools are built from alloys such as aluminium bronze and beryllium copper. These metals exhibit low magnetic permeability and spark-resistance properties suited for hazardous atmospheres.

How is spark risk tested or certified?

Compliance often involves testing under standards like EN 80079-38 to verify impact energies (for example up to 102 J) without ignition in hydrogen air atmospheres. Tools may also be certified under ATEX directives for use in explosive zones.

What are the common tip types or variations in this category?

Variations include pointed-end, flat-end, groove, cape or cross-chisels; offset or straight caulking tools; wedges and flange wedges; bars such as pry or pinch bars; wrecking or crowbar styles; and earthing spikes. Each type differs in tip shape, thickness, length and intended mechanical action.

In what environments are non-sparking chisels, wedges and crowbars essential?

Environments with flammable vapors, combustible dusts, explosive atmospheres or highly sensitive magnetic fields—such as chemical plants, offshore platforms, mines, oil refineries, or MRI-equipped facilities—require non-sparking tools to reduce fire or ignition risks.

What technical specifications should be reviewed before selecting a tool?

Examine material type (aluminium bronze vs beryllium copper), impact energy rating, magnetic permeability, hardness, tip geometry, size (length, width, thickness), compatibility with tool holders or pneumatic systems, and certification compliance for ATEX or equivalent standards.

AMPCO Safety Tools • Flat end pneumatic chisel • (AlBz)

AMPCO Safety Tools • Pointed end pneumatic chisel • (BeCu)

AMPCO Safety Tools • Pointed end pneumatic chisel • (AlBz)

AMPCO Safety Tools • Pointed end pneumatic chisel • DIN20376 (BeCu)

AMPCO Safety Tools • Pointed end pneumatic chisel • DIN20376 (AlBz)

AMPCO Safety Tools • Diamond point chisel • (BeCu)

AMPCO Safety Tools • Diamond point chisel • (AlBz)

AMPCO Safety Tools • Groove chisel • (BeCu)

AMPCO Safety Tools • Groove chisel • (AlBz)

AMPCO Safety Tools • Cape chisel, Cross chisel • (BeCu)

AMPCO Safety Tools • Cape chisel, Cross chisel • (AlBz)

AMPCO Safety Tools • Hand chisel, flat chisel (Oval) • (BeCu)

AMPCO Safety Tools • Hand chisel, flat chisel (Oval) • (AlBz)

AMPCO Safety Tools • Hand chisel, flat chisel • (BeCu)

AMPCO Safety Tools • Hand chisel, flat chisel • (AlBz)

WEDO • Crowbar, wrecking bar • Aluminum Bronze