Mandrels and pins - Non-sparking

Showing 1–16 of 18 resultsSorted by popularity

AMPCO Safety Tools • Awl, Pricker • (BeCu)
€27.04 Excl. VAT Add to cart
AMPCO Safety Tools • Scriber, scratch needle, scratch tip • (BeCu)
€41.68 Excl. VAT Add to cart
AMPCO Safety Tools • Offset pin, Angled pin, Angled mandrel • (BeCu)
Price range: €142.24 through €450.64 Excl. VAT Select options This product has multiple variants. The options may be chosen on the product page
AMPCO Safety Tools • Offset pin, Angled pin, Angled mandrel • (AlBz)
Price range: €84.96 through €268.96 Excl. VAT Select options This product has multiple variants. The options may be chosen on the product page
AMPCO Safety Tools • Straight pin, Pull mandrel • (BeCu)
Price range: €33.84 through €216.32 Excl. VAT Select options This product has multiple variants. The options may be chosen on the product page
AMPCO Safety Tools • Straight pin, Pull mandrel • (AlBz)
Price range: €22.24 through €80.56 Excl. VAT Select options This product has multiple variants. The options may be chosen on the product page
AMPCO Safety Tools • Center punch, dive pin • (BeCu)
Price range: €32.96 through €68.80 Excl. VAT Select options This product has multiple variants. The options may be chosen on the product page
AMPCO Safety Tools • Center punch, dive pin • (AlBz)
Price range: €22.16 through €46.48 Excl. VAT Select options This product has multiple variants. The options may be chosen on the product page
AMPCO Safety Tools • Pin punch, drive mandrel • (BeCu)
Price range: €33.68 through €173.28 Excl. VAT Select options This product has multiple variants. The options may be chosen on the product page
AMPCO Safety Tools • Pin punch, drive mandrel • (AlBz)
Price range: €22.00 through €81.36 Excl. VAT Select options This product has multiple variants. The options may be chosen on the product page
AMPCO Safety Tools • Pin punch, drive mandrel DIN6450 • (BeCu)
Price range: €27.20 through €78.88 Excl. VAT Select options This product has multiple variants. The options may be chosen on the product page
AMPCO Safety Tools • Barrel type drift pin, Through-driver (spindle-shaped) • (BeCu)
Price range: €67.52 through €183.36 Excl. VAT Select options This product has multiple variants. The options may be chosen on the product page
AMPCO Safety Tools • Barrel type drift pin, Through-driver (spindle-shaped) • (AlBz)
Price range: €40.24 through €109.36 Excl. VAT Select options This product has multiple variants. The options may be chosen on the product page
AMPCO Safety Tools • Machinist’s punch, drive mandrel (conical) • (BeCu)
Price range: €73.20 through €186.64 Excl. VAT Select options This product has multiple variants. The options may be chosen on the product page
AMPCO Safety Tools • Machinist’s punch, drive mandrel (conical) • (AlBz)
Price range: €43.76 through €111.20 Excl. VAT Select options This product has multiple variants. The options may be chosen on the product page
AMPCO Safety Tools • Mandrel, Drift pin conical • (BeCu)
Price range: €44.16 through €244.64 Excl. VAT Select options This product has multiple variants. The options may be chosen on the product page

What is Mandrels and pins - Non-sparking?

Mandrels and pins non-sparking are specialised non-magnetic hand tools designed to avoid spark generation in hazardous environments. Comprising mandrels, pins, punch-type tools and drift pins, these non-sparking tools are typically made from materials such as aluminium bronze and beryllium copper. They serve key roles in industrial maintenance, fabrication and repair in zones where flammable vapors or combustible dust are present.

Products You’ll Find in This Category

In this section you’ll find several types of non-sparking mandrels and pins, including straight pins or pull mandrels, drift pins or mandrels conical, barrel-type drift pins through-drivers (spindle-shaped), pin punches or drive mandrels, centre punches or dive pins, and awls or prickers. These items come in variants of aluminium bronze (AlBz) or beryllium copper (BeCu). Sizes vary by length and diameter depending on the specific tool type and its intended use.

Applications & Industry Use Cases

Non-sparking mandrels and pins are deployed where ignition risk must be minimised, such as in petrochemical plants, gas extraction or explosion risk zones (ATEX environments). Straight pins and pull mandrels are often used for alignment, assembly or fixing components. Drift pins or drive mandrels serve to force out pins or bolts in machinery disassembly. Centre punches enable marking or initiating a hole before drilling. The awls or prickers are used for scribing or surface marking. Secondary terms include non-magnetic tools and explosion‐proof safety tools in industries like oil & gas, chemical processing, mining, or any plant requiring strict spark-resistance and non-magnetism.

Technical Guide to Mandrels and pins - Non-sparking

This category covers solid mandrels and pins whose primary function is to transmit force or to align components without producing sparks. Key technical characteristics are the material composition—aluminium bronze or beryllium copper—alloys chosen for their low magnetic permeability and ability to resist ignition under impact. Sizing parameters include diameter (d), length (l), and specific dimensions such as a × d × l or d × l, depending on tool type.
Performance parameters may include compliance with standards for impact energy (e.g. tools tested under EN 80079-38 for non-sparking behavior and withstanding impact energies up to around 102 J), as well as conformity to ATEX directive classifications for explosion risk zones. Tolerances relate to dimensional accuracy to ensure proper fit in holes or between components.
Common variations: straight pins vs angled or offset pins; drift pins vs pull mandrels; centre punches vs prickers. Each differs in shape, force direction, or point type. Material choice influences corrosion resistance, magnetic behavior and durability. Use conditions such as wet or corrosive environment, temperature, mechanical load, and magnetic sensitivity affect selection.

Why buy Mandrels and pins - Non-sparking at MEMIDOS.

MEMIDOS is a global B2B platform connecting industrial buyers with verified manufacturers and suppliers, enabling direct procurement without intermediaries. Buyers benefit from transparency and competitive pricing by eliminating middle men. Payment is handled securely via escrow, with funds held by MEMIDOS until shipment or order conditions are met, providing buyer protection and supplier payment reliability. The range includes high-quality mandrels and pins crafted in materials like aluminium bronze and beryllium copper for demanding industrial and explosion risk environments. The platform simplifies international sourcing and offers clarity in standards, material grades, and supply options.

Frequently Asked Questions about Mandrels and pins - Non-sparking

What materials are used in non-sparking mandrels and pins?

The tools are typically made from aluminium bronze (AlBz) or beryllium copper (BeCu). These materials offer low magnetic permeability and are less likely to create sparks under impact or friction.

How does ATEX or EN 80079-38 relate to this category?

EN 80079-38 specifies test methods and requirements for non-sparking tools in hazardous zones. Some tools in this category are tested under Annex E of EN 80079-38 for impact energy levels (up to about 102 J) and designed to meet ATEX directive requirements for explosion protection.

What key dimensions should be considered when selecting a mandrel or pin?

Key dimensions include diameter, length, and where applicable, shape parameters such as a × d × l for drift pins or dimension pairs (d × l) for straight pins. These dimensions must match the application’s fit tolerances and load requirements.

What are the typical use cases for straight pins versus drift pins?

Straight pins are used for alignment, pulling or precise positioning. Drift pins and drive mandrels are designed for driving out fasteners or aligning holes under force. The shapes differ—straight versus tapered or spindle—to match the mechanical task.

What factors affect tool performance in non-sparking categories?

Environmental conditions such as exposure to moisture or corrosive agents, operational temperature, mechanical load, impact energy, and the presence of magnetic fields all influence performance. Material quality and compliance with relevant standards are also critical.

AMPCO Safety Tools • Awl, Pricker • (BeCu)

AMPCO Safety Tools • Scriber, scratch needle, scratch tip • (BeCu)

AMPCO Safety Tools • Offset pin, Angled pin, Angled mandrel • (BeCu)

AMPCO Safety Tools • Offset pin, Angled pin, Angled mandrel • (AlBz)

AMPCO Safety Tools • Straight pin, Pull mandrel • (BeCu)

AMPCO Safety Tools • Straight pin, Pull mandrel • (AlBz)

AMPCO Safety Tools • Center punch, dive pin • (BeCu)

AMPCO Safety Tools • Center punch, dive pin • (AlBz)

AMPCO Safety Tools • Pin punch, drive mandrel • (BeCu)

AMPCO Safety Tools • Pin punch, drive mandrel • (AlBz)

AMPCO Safety Tools • Pin punch, drive mandrel DIN6450 • (BeCu)

AMPCO Safety Tools • Barrel type drift pin, Through-driver (spindle-shaped) • (BeCu)

AMPCO Safety Tools • Barrel type drift pin, Through-driver (spindle-shaped) • (AlBz)

AMPCO Safety Tools • Machinist’s punch, drive mandrel (conical) • (BeCu)

AMPCO Safety Tools • Machinist’s punch, drive mandrel (conical) • (AlBz)

AMPCO Safety Tools • Mandrel, Drift pin conical • (BeCu)