Description
Glutolin • Glutofill WG • gypsum-based joint filler
The Glutolin Glutofill WG gypsum-based joint filler is a synthetic resin modified, gypsum-based joint filler for indoor use and optimum processing characteristics. Premium indoor bonding filler, even on critical surfaces.
For filling stress-free gypsum plasterboard and gypsum fibreboard assemblies, even without scrim reinforcement. It is workable for 45 minutes.
Not suitable for filling glass, plastic, wood, metal and emulsion pain surfaces.
Additional information:
- Density: approx. 0,83 g / cm³
- pH – value: 7 – 8
- Usage: 1 kg powder per m2 with thickness of 1 mm
- Mixing ratio: 1.8–2.2 parts by volume powder to 1 part by volume water (e.g. 1 kg powder in 600 ml water)
- Components: Synthetic resin, methyl cellulose, natural gypsum
- Storage: Store in a dry place and keep the containers tightly sealed.
Application:
Pour clean, cold water into a container and sprinkle in Glutofill WG. Stir vigorously until a smooth, lump-free mortar results. Use a firmer consistency to fill cracks and holes than for widespread filling. The filling compound can be applied with a filling knife or trowel after 2-3 minutes maturing time.
Minor unevenness can be removed using a wet sponge board before the filler has completely hardened. After the filler has completely dried out the surface can be reground. It may be necessary to prime the improved areas or the whole surface using Glutogrund LF Primer to avoid uneven drying of subsequent coats of paint of improving works.
Do not use if the surface and/or room temperature is less than +5° Celsius. Clean tools in water immediately after use.
Technical data – English
Technical data – German
Security data – English
Security data – German
Reviews
There are no reviews yet.