NC drill bit 90° 3-12mm
€16,35 – €59,94 Excl. VAT
Choose the desired model:
JK Nástroje • NC drill bit 90° 3-12mm
NC drill bit 3-12mms with high-quality TiAlN-based coating. For drilling and countersinking in components out of steel, stainless steel, aluminium alloys, non-ferrous metals, cast iron, plastics.
|SKU||NC 90-0030||NC 90-0040||NC 90-0050||NC 90-0060||NC 90-0080||NC 90-0100||NC 90-0120|
|Tool diameter (d)||3 mm||4 mm||5 mm||6 mm||8 mm||10 mm||12 mm|
|Shank diameter (D)||3 mm||4 mm||5 mm||6 mm||8 mm||10 mm||12 mm|
|Total length (L)||40 mm||40 mm||50 mm||50 mm||50 mm||72 mm||72 mm|
|Number of teeth (Z)||2||2||2||2||2||2||2|
High-quality TiAlN-based coating, microhardness (HV 0.05) = 3300, maximum working temperature 900°C, low friction coefficient (dry against steel 0.25)
High durability compared to conventional TiAlN coating.
Suitable for high heat loads (dry machining, HSC)
Purple TiAlN coating is one of the most widely used coatings in modern high-performance machining. TiAlN coatings are resistant to oxidation and allow work to be performed approximately 20 – 35% faster than with TiN coating. The aluminium content of these coatings is approximately 50 percent. TiAlN coating is applicable for machining of abrasive materials such as cast iron and is suitable for dry machining due to its high heat resistance.
JK Nástroje – High-quality cutting tools made in Europe.
3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm, 12 mm
Only logged in customers who have purchased this product may leave a review.
1.1 For orders where the Seller is arranging transport and are delivering the goods at the buyers requested delivery address, the delivery terms are: DAP – Delivery At Place (Buyers delivery address) Incoterms® 2020. The Seller delivers the goods to a named place of destination, but is not responsible for unloading. His responsibilities include packing, export clearance, carriage expenses and any terminal costs up to the agreed destination. The Buyer is responsible for all costs, duties and taxes associated with unloading the goods. He is also responsible for clearing customs to import the products into the named country of destination.
1.2 For orders where the Buyer is picking up or arranging transport of the goods from Sellers address the delivery terms are: EXW - Ex Works (Sellers address) Incoterms® 2020. The Seller is responsible for making the goods available at its premises. The Buyer handles all costs and risk after the products are collected.
Cancellation / Return / Refund Policy
2.1 Orders can be cancelled until they have been shipped. However maximum 24 hours after the order has been placed.
2.2 Standard products kept in store by the Seller can be returned until 7 days after delivery. The returned products must be unused and in original packaging to be refunded. The shipping costs are non-refundable. Products produced to order cannot be returned and refunded.
2.3 Se how to initiate a return here.
3.1 The Seller warrants to the Buyer that all products delivered by the Seller are free of defects in relation to materials, design and finish (the "Warranty"). The Warranty applies for the warranty period for the specific product, and any claim from the Buyer under the Warranty must have been made in writing to the Seller within the warranty period. The warranty period for the product is specified on the MEMIDOS product page. The warranty period is counted from delivery of the product.
3.2 Complaints must be made in writing and be received by the seller no later than 6 working days after the
error/defect could have been discovered using general diligence. In all events, a complaint must have taken place before expiry of the warranty period.
3.3 In case of timely complaints, see 3.2, The Seller is obliged, at the Seller’s own choice, to redeliver or repair products not in compliance with the Warranty. This is the Buyer’s sole remedy in the case that supplied product are not in compliance with the Warranty or otherwise defective. The Seller is not obliged to pay the installation costs in the events where installation can usually be made by the Buyer.
3.4 The warranty only applies if the product has been handled, stored and used with the proper care, for the intended purpose and in compliance with applicable law, user instructions and other instructions from the Seller, and that the products supplied, have not been changed or otherwise modified in any way. No warranty is granted for wearing parts, and usual wear and tear are not covered by the warranty.
3.5 No warranty is granted to products that can be categorised as wearing parts or consumables.
There are no reviews yet.